How can I replace my doors without rebuilding?

When is replacement of doors possible without rebuilding?

It is only possible to replace a raised door without major remodelling. If the existing frame is intact, a new aluminium upright door is often fitted directly into it. Pivot doors and sliding doors cannot be installed in an existing frame, requiring more substantial work.

As Aluwdoors only provides customised solutions, every door is made to exact dimensions. Even if your current door deviates somewhat in size or shape, we will ensure that the new door fits perfectly. This gives your interior a beautiful addition.

Measuring and fitting the new door

For a new door without remodelling, it is crucial that the measurements are exactly right. This starts with measuring the width and height of the opening at several points, to reveal any small discrepancies in the wall. 

The finished floor height and any skirting boards should also be taken into account, as this directly affects the connection of the door. Even the ceiling finish plays a role with higher doors or walls. 

Because customisation is a millimetre job, it is wise to leave the measuring to the experts. That way you can be sure the door will fit perfectly.

Different door types for replacement without conversion

Replacing a door does not always have to involve chopping and breaking. Our extras make aluminium doors even more child-friendly. Think of a soft-close system, a well-placed door stop or a damper on the floor that prevents the door from closing too hard.

In addition, choose handles that are comfortable to hold and have no sharp corners. This way, you create a door that is safe to use, even in a family environment. Want to know what will make your door even safer and more child-friendly? Then visit one of our showrooms in Nunspeet, Barendrecht, Mijdrecht or Veghel, or take direct contact us on for personal advice.

Aluminium overlay doors are made to measure and therefore often fit into existing openings or frames. Depending on your space and requirements, there are different types of doors that you can have fitted without any remodelling.

Aluminium pivot doors

Pivot doors pivot on special hinges embedded in the floor and ceiling. This makes them ideal for existing passages without frames or when you want a tighter look.

Hinged doors in existing frames

A hinged door cannot be installed in an existing frame because it always requires proper preparations to the frame. Adjustments to the frame are often needed to make the door fit properly. With this work, you still get a neat finish that suits the room.

Sliding doors

Sliding doors are a practical solution in small spaces. The rail of such doors is placed on the wall or in a niche. Adjustments are always needed to the floor or ceiling, such as installing fasteners. This does save space.

Installation process without conversion

Installing a new overlay door without rebuilding is often easier than you think. It is important that the door is removed before we start work, so that the new door is fitted correctly. 

The door is then installed in its entirety. Because everything has already been precisely measured by our experts, the door fits properly right away. Would you like to do the measuring yourself? You can, but for a good result it is advisable to leave the entire process to our expertsThen the door is adjusted so that it turns or slides smoothly. You can start using it right away. Wondering what your new door will look like? Visit one of our showrooms or take contact us on for personal advice. You will find our showrooms in Barendrecht, Nunspeet, Mijdrecht or Veghel.