What to do if the ceiling is not solid enough

Attachment to floor or wall

Is your ceiling not suitable to support the weight of a door or wall system? Then there are several mounting solutions where the ceiling is not stressed. 

A common option for pivot doors and sliding doors is wall mounting. Here, the rail or hinge is fixed directly to a solid wall, so the full weight of the door is absorbed by the wall. It is important that you have solid walls made of concrete or brick. Reinforced partition walls are also suitable for attaching doors to.

This way, it remains possible to install a door or wall system even if your ceiling is not solid enough. Our specialists will be happy to advise you on the best method in your situation.

Installation of additional support structure

An additional support structure is a good solution if your ceiling is not strong enough to support the weight of a door or wall system. Such a solution reinforces the ceiling locally where the attachment will be.

For example, the construction consists of a steel or aluminium crossbeam that is firmly anchored in load-bearing walls. This beam distributes the weight of the door system over a larger area, reducing the risk of a weakened ceiling or damage. In many cases, the reinforcement is concealed behind a finishing panel or ceiling tile, so that the whole thing looks inconspicuous.

By reinforcing your ceiling, ceiling mounting remains possible even if your ceiling does not actually have sufficient load-bearing capacity. Want to know if such an additional load-bearing structure is possible for you? Contact Aluwdoors for tailored advice.

Switching to a different type of door or wall

There are situations where a aluminium door to the ceiling is not the best choice. This is the case, for example, if the structure has too little load-bearing capacity or its fastening becomes too complex. 

If you have a lightweight suspended or plasterboard ceiling, a wall-mounted product is often more practical. For example, this is a wall-mounted sliding door system or a upright door in an existing frame. 

Do you have questions about what is the safest option for you? Contact contact us at or visit our showrooms in Nunspeet, Mijdrecht, Barendrecht or Veghel.