Doors for bathroom situations
Our hinged doors are suitable for wet rooms. You can therefore use the door as a shower partition. The aluminium and the six-millimetre laminated safety glass from which the doors and walls are made can withstand some moisture. However, it is important that the wet side is carefully sealed with silicone.

| 18-09-2025 | |
| Reading time: 3 minutes | |
| Inspiration |

Which products are suitable for bathroom situations?
Sliding doors and hinged doors are easily used in bathrooms and other wet areas. However, it is important that all surrounding joints are carefully sealed with silicone sealant. Completely seal any gaps between the door profile, the wall and the floor.
Pivot doors are not suitable for shower situations, as their hinges can start to rust. Eventually, this can affect the entire door. Fixed walls are possible when the fixings and seals are correctly positioned.
Extra sealing and assembly adjustments
Wet areas always require extra sealing. Start by caulking the rubbers and the glued parts so that water cannot get between the profile and the glass anywhere. Strengthen the joints of the door and the profiles with neutral silicone sealant.
Also neatly seal the corners and screw points and let the silicone cure completely before taking a shower in the wet room again. Always install doors and walls level, also seal the fixing points all around with sealant and make sure that water can always drain away. This way the door or wall will keep looking neat for longer. Because aluminium does not rust, a black aluminium door also suitable for use in a bathroom.
Ventilation and condensation prevention
Good ventilation prevents warm, humid air from lingering and subsequently condensing. This allows mould and bacteria to grow quickly, sealant edges to discolour and rubber seals to wear out faster. Therefore, always ensure good air extraction, for example by putting a window on the tilt position. Otherwise, use a ventilation grille or mechanical extraction.
Doors in wet rooms are often intentionally designed not to go all the way up to the ceiling. The gap above the door allows humid air to escape. Combined with regular ventilation, this keeps your wet room fresher and makes the finish of your door or wall last longer.

Glass selection for wet rooms
For wet rooms there are several suitable glass options, depending on the desired look and privacy. In smaller bathrooms, clear glass creates a more open feel, whereas frosted glass offers more privacy without blocking too much light.
All standard panes of 6-millimetre safety glass for doors and 6-millimetre safety glass for walls are moisture-resistant and therefore suitable for installation in wet rooms. This way, you can always choose a glass variant that suits both the function and the atmosphere of the room.
Can a sliding door be installed directly in a shower?
A sliding door is only suitable at the entrance of wet rooms, right? in wet spaces. This is because the sliding door must not come into contact with too much water. A sliding door is, for example, ideal when the entrance to a shower room is located in a narrow hallway. A steel pivot door Can be used in wet rooms.
Are you curious about what a door in your wet room could look like? Feel free to ask us about the possibilities and a bespoke design. Contact us or drop by our showrooms in Barendrecht, Mijdrecht, Veghel or Nunspeet.
| 18-09-2025 | |
| Reading time: 3 minutes | |
| Inspiration |




